aboutsummaryrefslogtreecommitdiff
path: root/stm32/usb_conf
diff options
context:
space:
mode:
Diffstat (limited to 'stm32/usb_conf')
-rw-r--r--stm32/usb_conf/usb_bsp.c337
-rw-r--r--stm32/usb_conf/usb_bsp.h97
-rw-r--r--stm32/usb_conf/usb_conf.h287
-rw-r--r--stm32/usb_conf/usbd_conf.h97
-rw-r--r--stm32/usb_conf/usbd_desc.c324
-rw-r--r--stm32/usb_conf/usbd_desc.h114
-rw-r--r--stm32/usb_conf/usbd_usr.c126
7 files changed, 1382 insertions, 0 deletions
diff --git a/stm32/usb_conf/usb_bsp.c b/stm32/usb_conf/usb_bsp.c
new file mode 100644
index 0000000..339b3fd
--- /dev/null
+++ b/stm32/usb_conf/usb_bsp.c
@@ -0,0 +1,337 @@
+/**
+ ******************************************************************************
+ * @file usb_bsp.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 19-September-2011
+ * @brief This file is responsible to offer board support package and is
+ * configurable by user.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_bsp.h"
+#include "usbd_conf.h"
+#include "stm32f4xx_conf.h"
+#include "stm32f4xx_gpio.h"
+#include "stm32f4xx_exti.h"
+#include "stm32f4xx_rcc.h"
+#include "misc.h"
+
+
+void USB_OTG_BSP_ConfigVBUS(USB_OTG_CORE_HANDLE *pdev) {
+
+}
+
+void USB_OTG_BSP_DriveVBUS(USB_OTG_CORE_HANDLE *pdev,uint8_t state) {
+
+}
+
+
+/**
+* @brief USB_OTG_BSP_Init
+* Initializes BSP configurations
+* @param None
+* @retval None
+*/
+
+void USB_OTG_BSP_Init(USB_OTG_CORE_HANDLE *pdev)
+{
+ GPIO_InitTypeDef GPIO_InitStructure;
+
+#ifndef USE_ULPI_PHY
+#ifdef USB_OTG_FS_LOW_PWR_MGMT_SUPPORT
+ EXTI_InitTypeDef EXTI_InitStructure;
+ NVIC_InitTypeDef NVIC_InitStructure;
+#endif
+#endif
+
+
+ #ifdef USE_USB_OTG_FS
+
+ RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_GPIOA , ENABLE);
+
+ /* Configure SOF VBUS ID DM DP Pins */
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 |
+ GPIO_Pin_9 |
+ GPIO_Pin_11 |
+ GPIO_Pin_12;
+
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+ GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
+ GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+ GPIO_PinAFConfig(GPIOA,GPIO_PinSource8,GPIO_AF_OTG1_FS) ;
+ GPIO_PinAFConfig(GPIOA,GPIO_PinSource9,GPIO_AF_OTG1_FS) ;
+ GPIO_PinAFConfig(GPIOA,GPIO_PinSource11,GPIO_AF_OTG1_FS) ;
+ GPIO_PinAFConfig(GPIOA,GPIO_PinSource12,GPIO_AF_OTG1_FS) ;
+
+ /* this for ID line debug */
+
+
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
+ GPIO_InitStructure.GPIO_OType = GPIO_OType_OD;
+ GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_UP ;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_Init(GPIOA, &GPIO_InitStructure);
+ GPIO_PinAFConfig(GPIOA,GPIO_PinSource10,GPIO_AF_OTG1_FS) ;
+
+ RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
+ RCC_AHB2PeriphClockCmd(RCC_AHB2Periph_OTG_FS, ENABLE) ;
+ #else // USE_USB_OTG_HS
+
+ #ifdef USE_ULPI_PHY // ULPI
+ RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_GPIOA | RCC_AHB1Periph_GPIOB |
+ RCC_AHB1Periph_GPIOC | RCC_AHB1Periph_GPIOH |
+ RCC_AHB1Periph_GPIOI, ENABLE);
+
+
+ GPIO_PinAFConfig(GPIOA,GPIO_PinSource3, GPIO_AF_OTG2_HS) ; // D0
+ GPIO_PinAFConfig(GPIOA,GPIO_PinSource5, GPIO_AF_OTG2_HS) ; // CLK
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource0, GPIO_AF_OTG2_HS) ; // D1
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource1, GPIO_AF_OTG2_HS) ; // D2
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource5, GPIO_AF_OTG2_HS) ; // D7
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource10,GPIO_AF_OTG2_HS) ; // D3
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource11,GPIO_AF_OTG2_HS) ; // D4
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource12,GPIO_AF_OTG2_HS) ; // D5
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource13,GPIO_AF_OTG2_HS) ; // D6
+ GPIO_PinAFConfig(GPIOH,GPIO_PinSource4, GPIO_AF_OTG2_HS) ; // NXT
+ GPIO_PinAFConfig(GPIOI,GPIO_PinSource11,GPIO_AF_OTG2_HS) ; // DIR
+ GPIO_PinAFConfig(GPIOC,GPIO_PinSource0, GPIO_AF_OTG2_HS) ; // STP
+
+ // CLK
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5 ;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+ // D0
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 ;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+ GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
+ GPIO_Init(GPIOA, &GPIO_InitStructure);
+
+
+
+ // D1 D2 D3 D4 D5 D6 D7
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 |
+ GPIO_Pin_5 | GPIO_Pin_10 |
+ GPIO_Pin_11| GPIO_Pin_12 |
+ GPIO_Pin_13 ;
+
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
+ GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL ;
+ GPIO_Init(GPIOB, &GPIO_InitStructure);
+
+
+ // STP
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 ;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_Init(GPIOC, &GPIO_InitStructure);
+
+ //NXT
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_Init(GPIOH, &GPIO_InitStructure);
+
+
+ //DIR
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 ;
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_Init(GPIOI, &GPIO_InitStructure);
+
+
+ RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_OTG_HS |
+ RCC_AHB1Periph_OTG_HS_ULPI, ENABLE) ;
+
+ #else
+ #ifdef USE_I2C_PHY
+ RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_GPIOB , ENABLE);
+ /* Configure RESET INTN SCL SDA (Phy/I2C) Pins */
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 |
+ GPIO_Pin_1 |
+ GPIO_Pin_10 |
+ GPIO_Pin_11;
+
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_Init(GPIOB, &GPIO_InitStructure);
+
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource0,GPIO_AF_OTG2_FS) ;
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource1,GPIO_AF_OTG2_FS) ;
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource10,GPIO_AF_OTG2_FS) ;
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource11,GPIO_AF_OTG2_FS);
+ RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_OTG_HS, ENABLE) ;
+
+ #else
+
+ RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB , ENABLE);
+
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12 |
+ GPIO_Pin_13 |
+ GPIO_Pin_14 |
+ GPIO_Pin_15;
+
+ GPIO_InitStructure.GPIO_Speed = GPIO_Speed_100MHz;
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;
+ GPIO_Init(GPIOB, &GPIO_InitStructure);
+
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource12, GPIO_AF_OTG2_FS) ;
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource13,GPIO_AF_OTG2_FS) ;
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource14,GPIO_AF_OTG2_FS) ;
+ GPIO_PinAFConfig(GPIOB,GPIO_PinSource15,GPIO_AF_OTG2_FS) ;
+ RCC_AHB1PeriphClockCmd( RCC_AHB1Periph_OTG_HS, ENABLE) ;
+ #endif
+ #endif // USE_ULPI_PHY
+
+ #endif //USB_OTG_HS
+
+
+ /* enable the PWR clock */
+ RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE);
+
+ /* Configure the Key button in EXTI mode */
+ //STM_EVAL_PBInit(BUTTON_USER, BUTTON_MODE_EXTI);
+
+#ifdef USB_OTG_FS_LOW_PWR_MGMT_SUPPORT
+ EXTI_ClearITPendingBit(EXTI_Line18);
+
+ EXTI_InitStructure.EXTI_Line = EXTI_Line18;
+ EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
+ EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
+ EXTI_InitStructure.EXTI_LineCmd = ENABLE;
+ EXTI_Init(&EXTI_InitStructure);
+
+ EXTI_ClearITPendingBit(EXTI_Line18);
+
+ NVIC_InitStructure.NVIC_IRQChannel = OTG_FS_WKUP_IRQn;
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+ NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+ NVIC_Init(&NVIC_InitStructure);
+
+ EXTI_ClearITPendingBit(EXTI_Line18);
+#endif
+
+#ifdef USB_OTG_HS_LOW_PWR_MGMT_SUPPORT
+ EXTI_ClearITPendingBit(EXTI_Line20);
+
+ EXTI_InitStructure.EXTI_Line = EXTI_Line20;
+ EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
+ EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising;
+ EXTI_InitStructure.EXTI_LineCmd = ENABLE;
+ EXTI_Init(&EXTI_InitStructure);
+
+ EXTI_ClearITPendingBit(EXTI_Line20);
+
+ NVIC_InitStructure.NVIC_IRQChannel = OTG_HS_WKUP_IRQn;
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 2;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2;
+ NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+ NVIC_Init(&NVIC_InitStructure);
+
+ EXTI_ClearITPendingBit(EXTI_Line20);
+#endif
+
+ EXTI_ClearITPendingBit(EXTI_Line0);
+}
+/**
+* @brief USB_OTG_BSP_EnableInterrupt
+* Enabele USB Global interrupt
+* @param None
+* @retval None
+*/
+void USB_OTG_BSP_EnableInterrupt(USB_OTG_CORE_HANDLE *pdev)
+{
+ NVIC_InitTypeDef NVIC_InitStructure;
+
+ NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
+#ifdef USE_USB_OTG_HS
+ NVIC_InitStructure.NVIC_IRQChannel = OTG_HS_IRQn;
+#else
+ NVIC_InitStructure.NVIC_IRQChannel = OTG_FS_IRQn;
+#endif
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = 3;
+ NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+ NVIC_Init(&NVIC_InitStructure);
+#ifdef USB_OTG_HS_DEDICATED_EP1_ENABLED
+ NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
+ NVIC_InitStructure.NVIC_IRQChannel = OTG_HS_EP1_OUT_IRQn;
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = 2;
+ NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+ NVIC_Init(&NVIC_InitStructure);
+
+ NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
+ NVIC_InitStructure.NVIC_IRQChannel = OTG_HS_EP1_IN_IRQn;
+ NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
+ NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
+ NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+ NVIC_Init(&NVIC_InitStructure);
+#endif
+}
+/**
+* @brief USB_OTG_BSP_uDelay
+* This function provides delay time in micro sec
+* @param usec : Value of delay required in micro sec
+* @retval None
+*/
+void USB_OTG_BSP_uDelay (const uint32_t usec)
+{
+ uint32_t count = 0;
+ const uint32_t utime = (120 * usec / 7);
+ do
+ {
+ if ( ++count > utime )
+ {
+ return ;
+ }
+ }
+ while (1);
+}
+
+
+/**
+* @brief USB_OTG_BSP_mDelay
+* This function provides delay time in milli sec
+* @param msec : Value of delay required in milli sec
+* @retval None
+*/
+void USB_OTG_BSP_mDelay (const uint32_t msec)
+{
+ USB_OTG_BSP_uDelay(msec * 1000);
+}
+/**
+* @}
+*/
+
+/**
+* @}
+*/
+
+/**
+* @}
+*/
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/stm32/usb_conf/usb_bsp.h b/stm32/usb_conf/usb_bsp.h
new file mode 100644
index 0000000..736f3d0
--- /dev/null
+++ b/stm32/usb_conf/usb_bsp.h
@@ -0,0 +1,97 @@
+/**
+ ******************************************************************************
+ * @file usb_bsp.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 22-July-2011
+ * @brief Specific api's relative to the used hardware platform
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_BSP__H__
+#define __USB_BSP__H__
+
+/* Includes ------------------------------------------------------------------*/
+#include "usb_core.h"
+#include "stm32f4xx.h"
+
+/** @addtogroup USB_OTG_DRIVER
+ * @{
+ */
+
+/** @defgroup USB_BSP
+ * @brief This file is the
+ * @{
+ */
+
+
+/** @defgroup USB_BSP_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USB_BSP_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USB_BSP_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USB_BSP_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USB_BSP_Exported_FunctionsPrototype
+ * @{
+ */
+void BSP_Init(void);
+
+void USB_OTG_BSP_Init (USB_OTG_CORE_HANDLE *pdev);
+void USB_OTG_BSP_uDelay (const uint32_t usec);
+void USB_OTG_BSP_mDelay (const uint32_t msec);
+void USB_OTG_BSP_EnableInterrupt (USB_OTG_CORE_HANDLE *pdev);
+#ifdef USE_HOST_MODE
+void USB_OTG_BSP_ConfigVBUS(USB_OTG_CORE_HANDLE *pdev);
+void USB_OTG_BSP_DriveVBUS(USB_OTG_CORE_HANDLE *pdev,uint8_t state);
+#endif
+/**
+ * @}
+ */
+
+#endif //__USB_BSP__H__
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff --git a/stm32/usb_conf/usb_conf.h b/stm32/usb_conf/usb_conf.h
new file mode 100644
index 0000000..bddd285
--- /dev/null
+++ b/stm32/usb_conf/usb_conf.h
@@ -0,0 +1,287 @@
+/**
+ ******************************************************************************
+ * @file usb_conf.h
+ * @author MCD Application Team
+ * @version V2.0.0
+ * @date 22-July-2011
+ * @brief general low level driver configuration
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_CONF__H__
+#define __USB_CONF__H__
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+
+/** @addtogroup USB_OTG_DRIVER
+ * @{
+ */
+
+/** @defgroup USB_CONF
+ * @brief USB low level driver configuration file
+ * @{
+ */
+
+/** @defgroup USB_CONF_Exported_Defines
+ * @{
+ */
+
+/* USB Core and PHY interface configuration.
+ Tip: To avoid modifying these defines each time you need to change the USB
+ configuration, you can declare the needed define in your toolchain
+ compiler preprocessor.
+ */
+#ifndef USE_USB_OTG_FS
+ //#define USE_USB_OTG_FS
+#endif /* USE_USB_OTG_FS */
+
+#ifndef USE_USB_OTG_HS
+ //#define USE_USB_OTG_HS
+#endif /* USE_USB_OTG_HS */
+
+#ifndef USE_ULPI_PHY
+ //#define USE_ULPI_PHY
+#endif /* USE_ULPI_PHY */
+
+#ifndef USE_EMBEDDED_PHY
+ //#define USE_EMBEDDED_PHY
+#endif /* USE_EMBEDDED_PHY */
+
+#ifndef USE_I2C_PHY
+ //#define USE_I2C_PHY
+#endif /* USE_I2C_PHY */
+
+
+#ifdef USE_USB_OTG_FS
+ #define USB_OTG_FS_CORE
+#endif
+
+#ifdef USE_USB_OTG_HS
+ #define USB_OTG_HS_CORE
+#endif
+
+/*******************************************************************************
+* FIFO Size Configuration in Device mode
+*
+* (i) Receive data FIFO size = RAM for setup packets +
+* OUT endpoint control information +
+* data OUT packets + miscellaneous
+* Space = ONE 32-bits words
+* --> RAM for setup packets = 10 spaces
+* (n is the nbr of CTRL EPs the device core supports)
+* --> OUT EP CTRL info = 1 space
+* (one space for status information written to the FIFO along with each
+* received packet)
+* --> data OUT packets = (Largest Packet Size / 4) + 1 spaces
+* (MINIMUM to receive packets)
+* --> OR data OUT packets = at least 2*(Largest Packet Size / 4) + 1 spaces
+* (if high-bandwidth EP is enabled or multiple isochronous EPs)
+* --> miscellaneous = 1 space per OUT EP
+* (one space for transfer complete status information also pushed to the
+* FIFO with each endpoint's last packet)
+*
+* (ii)MINIMUM RAM space required for each IN EP Tx FIFO = MAX packet size for
+* that particular IN EP. More space allocated in the IN EP Tx FIFO results
+* in a better performance on the USB and can hide latencies on the AHB.
+*
+* (iii) TXn min size = 16 words. (n : Transmit FIFO index)
+* (iv) When a TxFIFO is not used, the Configuration should be as follows:
+* case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
+* --> Txm can use the space allocated for Txn.
+* case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
+* --> Txn should be configured with the minimum space of 16 words
+* (v) The FIFO is used optimally when used TxFIFOs are allocated in the top
+* of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
+*******************************************************************************/
+
+/*******************************************************************************
+* FIFO Size Configuration in Host mode
+*
+* (i) Receive data FIFO size = (Largest Packet Size / 4) + 1 or
+* 2x (Largest Packet Size / 4) + 1, If a
+* high-bandwidth channel or multiple isochronous
+* channels are enabled
+*
+* (ii) For the host nonperiodic Transmit FIFO is the largest maximum packet size
+* for all supported nonperiodic OUT channels. Typically, a space
+* corresponding to two Largest Packet Size is recommended.
+*
+* (iii) The minimum amount of RAM required for Host periodic Transmit FIFO is
+* the largest maximum packet size for all supported periodic OUT channels.
+* If there is at least one High Bandwidth Isochronous OUT endpoint,
+* then the space must be at least two times the maximum packet size for
+* that channel.
+*******************************************************************************/
+
+/****************** USB OTG HS CONFIGURATION **********************************/
+#ifdef USB_OTG_HS_CORE
+ #define RX_FIFO_HS_SIZE 512
+ #define TX0_FIFO_HS_SIZE 512
+ #define TX1_FIFO_HS_SIZE 512
+ #define TX2_FIFO_HS_SIZE 0
+ #define TX3_FIFO_HS_SIZE 0
+ #define TX4_FIFO_HS_SIZE 0
+ #define TX5_FIFO_HS_SIZE 0
+ #define TXH_NP_HS_FIFOSIZ 96
+ #define TXH_P_HS_FIFOSIZ 96
+
+ //#define USB_OTG_HS_LOW_PWR_MGMT_SUPPORT
+ //#define USB_OTG_HS_SOF_OUTPUT_ENABLED
+
+ //#define USB_OTG_INTERNAL_VBUS_ENABLED
+ #define USB_OTG_EXTERNAL_VBUS_ENABLED
+
+ #ifdef USE_ULPI_PHY
+ #define USB_OTG_ULPI_PHY_ENABLED
+ #endif
+ #ifdef USE_EMBEDDED_PHY
+ #define USB_OTG_EMBEDDED_PHY_ENABLED
+ #endif
+ #ifdef USE_I2C_PHY
+ #define USB_OTG_I2C_PHY_ENABLED
+ #endif
+//#define USB_OTG_HS_INTERNAL_DMA_ENABLED
+ #define USB_OTG_HS_DEDICATED_EP1_ENABLED
+#endif
+
+/****************** USB OTG FS CONFIGURATION **********************************/
+#ifdef USB_OTG_FS_CORE
+ #define RX_FIFO_FS_SIZE 128
+ #define TX0_FIFO_FS_SIZE 64
+ #define TX1_FIFO_FS_SIZE 128
+ #define TX2_FIFO_FS_SIZE 0
+ #define TX3_FIFO_FS_SIZE 0
+ #define TXH_NP_FS_FIFOSIZ 96
+ #define TXH_P_FS_FIFOSIZ 96
+
+ //#define USB_OTG_FS_LOW_PWR_MGMT_SUPPORT
+ //#define USB_OTG_FS_SOF_OUTPUT_ENABLED
+#endif
+
+/****************** USB OTG MODE CONFIGURATION ********************************/
+//#define USE_HOST_MODE
+#define USE_DEVICE_MODE
+//#define USE_OTG_MODE
+
+
+#ifndef USB_OTG_FS_CORE
+ #ifndef USB_OTG_HS_CORE
+ #error "USB_OTG_HS_CORE or USB_OTG_FS_CORE should be defined"
+ #endif
+#endif
+
+
+#ifndef USE_DEVICE_MODE
+ #ifndef USE_HOST_MODE
+ #error "USE_DEVICE_MODE or USE_HOST_MODE should be defined"
+ #endif
+#endif
+
+#ifndef USE_USB_OTG_HS
+ #ifndef USE_USB_OTG_FS
+ #error "USE_USB_OTG_HS or USE_USB_OTG_FS should be defined"
+ #endif
+#else //USE_USB_OTG_HS
+ #ifndef USE_ULPI_PHY
+ #ifndef USE_EMBEDDED_PHY
+ #ifndef USE_I2C_PHY
+ #error "USE_ULPI_PHY or USE_EMBEDDED_PHY or USE_I2C_PHY should be defined"
+ #endif
+ #endif
+ #endif
+#endif
+
+/****************** C Compilers dependent keywords ****************************/
+/* In HS mode and when the DMA is used, all variables and data structures dealing
+ with the DMA during the transaction process should be 4-bytes aligned */
+#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
+ #if defined (__GNUC__) /* GNU Compiler */
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #define __ALIGN_BEGIN
+ #else
+ #define __ALIGN_END
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #elif defined (__TASKING__) /* TASKING Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #endif /* __CC_ARM */
+ #endif /* __GNUC__ */
+#else
+ #define __ALIGN_BEGIN
+ #define __ALIGN_END
+#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
+
+/* __packed keyword used to decrease the data type alignment to 1-byte */
+#if defined (__CC_ARM) /* ARM Compiler */
+ #define __packed __packed
+#elif defined (__ICCARM__) /* IAR Compiler */
+ #define __packed __packed
+#elif defined ( __GNUC__ ) /* GNU Compiler */
+ #define __packed __attribute__ ((__packed__))
+#elif defined (__TASKING__) /* TASKING Compiler */
+ #define __packed __unaligned
+#endif /* __CC_ARM */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USB_CONF_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USB_CONF_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USB_CONF_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USB_CONF_Exported_FunctionsPrototype
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+#endif //__USB_CONF__H__
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff --git a/stm32/usb_conf/usbd_conf.h b/stm32/usb_conf/usbd_conf.h
new file mode 100644
index 0000000..9fc6d51
--- /dev/null
+++ b/stm32/usb_conf/usbd_conf.h
@@ -0,0 +1,97 @@
+/**
+ ******************************************************************************
+ * @file usbd_conf.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 22-July-2011
+ * @brief USB Device configuration file
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CONF__H__
+#define __USBD_CONF__H__
+
+/** @defgroup USB_CONF_Exported_Defines
+ * @{
+ */
+#define USBD_CFG_MAX_NUM 1
+#define USBD_ITF_MAX_NUM 1
+#define USB_MAX_STR_DESC_SIZ 100
+
+/** @defgroup USB_VCP_Class_Layer_Parameter
+ * @{
+ */
+#define CDC_IN_EP 0x81 /* EP1 for data IN */
+#define CDC_OUT_EP 0x01 /* EP1 for data OUT */
+#define CDC_CMD_EP 0x82 /* EP2 for CDC commands */
+
+/* CDC Endpoints parameters: you can fine tune these values depending on the needed baudrates and performance. */
+#ifdef USE_USB_OTG_HS
+ #define CDC_DATA_MAX_PACKET_SIZE 512 /* Endpoint IN & OUT Packet size */
+ #define CDC_CMD_PACKET_SZE 8 /* Control Endpoint Packet size */
+
+ #define CDC_IN_FRAME_INTERVAL 40 /* Number of micro-frames between IN transfers */
+ #define APP_RX_DATA_SIZE 2048 /* Total size of IN buffer:
+ APP_RX_DATA_SIZE*8/MAX_BAUDARATE*1000 should be > CDC_IN_FRAME_INTERVAL*8 */
+#else
+ #define CDC_DATA_MAX_PACKET_SIZE 64 /* Endpoint IN & OUT Packet size */
+ #define CDC_CMD_PACKET_SZE 8 /* Control Endpoint Packet size */
+
+ #define CDC_IN_FRAME_INTERVAL 5 /* Number of frames between IN transfers */
+
+ //#define APP_RX_DATA_SIZE 2048 /* Total size of IN buffer: */
+ #define APP_RX_DATA_SIZE 10000
+
+#endif /* USE_USB_OTG_HS */
+
+#define APP_FOPS VCP_fops
+/**
+ * @}
+ */
+
+/** @defgroup USB_CONF_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USB_CONF_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USB_CONF_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USB_CONF_Exported_FunctionsPrototype
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+#endif //__USBD_CONF__H__
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff --git a/stm32/usb_conf/usbd_desc.c b/stm32/usb_conf/usbd_desc.c
new file mode 100644
index 0000000..3903b74
--- /dev/null
+++ b/stm32/usb_conf/usbd_desc.c
@@ -0,0 +1,324 @@
+/**
+ ******************************************************************************
+ * @file usbd_desc.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 19-September-2011
+ * @brief This file provides the USBD descriptors and string formatting method.
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include <assert.h>
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_req.h"
+#include "usbd_conf.h"
+#include "usb_regs.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_DESC
+ * @brief USBD descriptors module
+ * @{
+ */
+
+/** @defgroup USBD_DESC_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DESC_Private_Defines
+ * @{
+ */
+
+#define USBD_VID 0x0483
+
+#define USBD_PID 0x5740
+
+/** @defgroup USB_String_Descriptors
+ * @{
+ */
+#define USBD_LANGID_STRING 0x409
+#define USBD_MANUFACTURER_STRING "STMicroelectronics"
+
+#define USBD_PRODUCT_HS_STRING "STM32 Virtual ComPort in HS mode"
+#define USBD_SERIALNUMBER_HS_STRING "00000000050B"
+
+#define USBD_PRODUCT_FS_STRING "STM32 Virtual ComPort in FS Mode"
+#define USBD_SERIALNUMBER_FS_STRING "00000000050C"
+
+#define USBD_CONFIGURATION_HS_STRING "VCP Config"
+#define USBD_INTERFACE_HS_STRING "VCP Interface"
+
+#define USBD_CONFIGURATION_FS_STRING "VCP Config"
+#define USBD_INTERFACE_FS_STRING "VCP Interface"
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DESC_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DESC_Private_Variables
+ * @{
+ */
+
+USBD_DEVICE USR_desc =
+{
+ USBD_USR_DeviceDescriptor,
+ USBD_USR_LangIDStrDescriptor,
+ USBD_USR_ManufacturerStrDescriptor,
+ USBD_USR_ProductStrDescriptor,
+ USBD_USR_SerialStrDescriptor,
+ USBD_USR_ConfigStrDescriptor,
+ USBD_USR_InterfaceStrDescriptor,
+
+};
+
+#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
+ #if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+ #endif
+#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN uint8_t USBD_DeviceDesc[USB_SIZ_DEVICE_DESC] __ALIGN_END =
+ {
+ 0x12, /*bLength */
+ USB_DEVICE_DESCRIPTOR_TYPE, /*bDescriptorType*/
+ 0x00, /*bcdUSB */
+ 0x02,
+ 0x00, /*bDeviceClass*/
+ 0x00, /*bDeviceSubClass*/
+ 0x00, /*bDeviceProtocol*/
+ USB_OTG_MAX_EP0_SIZE, /*bMaxPacketSize*/
+ LOBYTE(USBD_VID), /*idVendor*/
+ HIBYTE(USBD_VID), /*idVendor*/
+ LOBYTE(USBD_PID), /*idVendor*/
+ HIBYTE(USBD_PID), /*idVendor*/
+ 0x00, /*bcdDevice rel. 2.00*/
+ 0x02,
+ USBD_IDX_MFC_STR, /*Index of manufacturer string*/
+ USBD_IDX_PRODUCT_STR, /*Index of product string*/
+ USBD_IDX_SERIAL_STR, /*Index of serial number string*/
+ USBD_CFG_MAX_NUM /*bNumConfigurations*/
+ } ; /* USB_DeviceDescriptor */
+
+#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
+ #if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+ #endif
+#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN uint8_t USBD_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC] __ALIGN_END =
+{
+ USB_LEN_DEV_QUALIFIER_DESC,
+ USB_DESC_TYPE_DEVICE_QUALIFIER,
+ 0x00,
+ 0x02,
+ 0x00,
+ 0x00,
+ 0x00,
+ 0x40,
+ 0x01,
+ 0x00,
+};
+
+#ifdef USB_OTG_HS_INTERNAL_DMA_ENABLED
+ #if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+ #endif
+#endif /* USB_OTG_HS_INTERNAL_DMA_ENABLED */
+/* USB Standard Device Descriptor */
+__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_SIZ_STRING_LANGID] __ALIGN_END =
+{
+ USB_SIZ_STRING_LANGID,
+ USB_DESC_TYPE_STRING,
+ LOBYTE(USBD_LANGID_STRING),
+ HIBYTE(USBD_LANGID_STRING),
+};
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DESC_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DESC_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_USR_DeviceDescriptor
+* return the device descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_USR_DeviceDescriptor( uint8_t speed , uint16_t *length)
+{
+ *length = sizeof(USBD_DeviceDesc);
+ return USBD_DeviceDesc;
+}
+
+/**
+* @brief USBD_USR_LangIDStrDescriptor
+* return the LangID string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_USR_LangIDStrDescriptor( uint8_t speed , uint16_t *length)
+{
+ *length = sizeof(USBD_LangIDDesc);
+ return USBD_LangIDDesc;
+}
+
+
+/**
+* @brief USBD_USR_ProductStrDescriptor
+* return the product string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_USR_ProductStrDescriptor( uint8_t speed , uint16_t *length)
+{
+
+ if(speed == 0)
+ {
+ USBD_GetString ((uint8_t*)USBD_PRODUCT_HS_STRING, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString ((uint8_t*)USBD_PRODUCT_FS_STRING, USBD_StrDesc, length);
+ }
+
+ assert(*length < USB_MAX_STR_DESC_SIZ);
+
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_USR_ManufacturerStrDescriptor
+* return the manufacturer string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_USR_ManufacturerStrDescriptor( uint8_t speed , uint16_t *length)
+{
+ USBD_GetString ((uint8_t*)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
+ assert(*length < USB_MAX_STR_DESC_SIZ);
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_USR_SerialStrDescriptor
+* return the serial number string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_USR_SerialStrDescriptor( uint8_t speed , uint16_t *length)
+{
+ if(speed == USB_OTG_SPEED_HIGH)
+ {
+ USBD_GetString ((uint8_t*)USBD_SERIALNUMBER_HS_STRING, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString ((uint8_t*)USBD_SERIALNUMBER_FS_STRING, USBD_StrDesc, length);
+ }
+ assert(*length < USB_MAX_STR_DESC_SIZ);
+ return USBD_StrDesc;
+}
+
+/**
+* @brief USBD_USR_ConfigStrDescriptor
+* return the configuration string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_USR_ConfigStrDescriptor( uint8_t speed , uint16_t *length)
+{
+ if(speed == USB_OTG_SPEED_HIGH)
+ {
+ USBD_GetString ((uint8_t*)USBD_CONFIGURATION_HS_STRING, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString ((uint8_t*)USBD_CONFIGURATION_FS_STRING, USBD_StrDesc, length);
+ }
+ assert(*length < USB_MAX_STR_DESC_SIZ);
+ return USBD_StrDesc;
+}
+
+
+/**
+* @brief USBD_USR_InterfaceStrDescriptor
+* return the interface string descriptor
+* @param speed : current device speed
+* @param length : pointer to data length variable
+* @retval pointer to descriptor buffer
+*/
+uint8_t * USBD_USR_InterfaceStrDescriptor( uint8_t speed , uint16_t *length)
+{
+ if(speed == 0)
+ {
+ USBD_GetString ((uint8_t*)USBD_INTERFACE_HS_STRING, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString ((uint8_t*)USBD_INTERFACE_FS_STRING, USBD_StrDesc, length);
+ }
+ assert(*length < USB_MAX_STR_DESC_SIZ);
+ return USBD_StrDesc;
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
+
diff --git a/stm32/usb_conf/usbd_desc.h b/stm32/usb_conf/usbd_desc.h
new file mode 100644
index 0000000..30c6f97
--- /dev/null
+++ b/stm32/usb_conf/usbd_desc.h
@@ -0,0 +1,114 @@
+/**
+ ******************************************************************************
+ * @file usbd_desc.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 19-September-2011
+ * @brief header file for the usbd_desc.c file
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef __USB_DESC_H
+#define __USB_DESC_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DESC
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DESC_Exported_Defines
+ * @{
+ */
+#define USB_DEVICE_DESCRIPTOR_TYPE 0x01
+#define USB_CONFIGURATION_DESCRIPTOR_TYPE 0x02
+#define USB_STRING_DESCRIPTOR_TYPE 0x03
+#define USB_INTERFACE_DESCRIPTOR_TYPE 0x04
+#define USB_ENDPOINT_DESCRIPTOR_TYPE 0x05
+#define USB_SIZ_DEVICE_DESC 18
+#define USB_SIZ_STRING_LANGID 4
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DESC_Exported_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_DESC_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_Variables
+ * @{
+ */
+extern uint8_t USBD_DeviceDesc [USB_SIZ_DEVICE_DESC];
+extern uint8_t USBD_StrDesc[USB_MAX_STR_DESC_SIZ];
+extern uint8_t USBD_OtherSpeedCfgDesc[USB_LEN_CFG_DESC];
+extern uint8_t USBD_DeviceQualifierDesc[USB_LEN_DEV_QUALIFIER_DESC];
+extern uint8_t USBD_LangIDDesc[USB_SIZ_STRING_LANGID];
+extern USBD_DEVICE USR_desc;
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DESC_Exported_FunctionsPrototype
+ * @{
+ */
+
+
+uint8_t * USBD_USR_DeviceDescriptor( uint8_t speed , uint16_t *length);
+uint8_t * USBD_USR_LangIDStrDescriptor( uint8_t speed , uint16_t *length);
+uint8_t * USBD_USR_ManufacturerStrDescriptor ( uint8_t speed , uint16_t *length);
+uint8_t * USBD_USR_ProductStrDescriptor ( uint8_t speed , uint16_t *length);
+uint8_t * USBD_USR_SerialStrDescriptor( uint8_t speed , uint16_t *length);
+uint8_t * USBD_USR_ConfigStrDescriptor( uint8_t speed , uint16_t *length);
+uint8_t * USBD_USR_InterfaceStrDescriptor( uint8_t speed , uint16_t *length);
+
+#ifdef USB_SUPPORT_USER_STRING_DESC
+uint8_t * USBD_USR_USRStringDesc (uint8_t speed, uint8_t idx , uint16_t *length);
+#endif /* USB_SUPPORT_USER_STRING_DESC */
+
+/**
+ * @}
+ */
+
+#endif /* __USBD_DESC_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
diff --git a/stm32/usb_conf/usbd_usr.c b/stm32/usb_conf/usbd_usr.c
new file mode 100644
index 0000000..b009957
--- /dev/null
+++ b/stm32/usb_conf/usbd_usr.c
@@ -0,0 +1,126 @@
+/**
+ ******************************************************************************
+ * @file usbd_usr.c
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 19-September-2011
+ * @brief This file includes the user application layer
+ ******************************************************************************
+ * @attention
+ *
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ *
+ * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>
+ ******************************************************************************
+ */
+
+#include "usbd_usr.h"
+#include "usbd_ioreq.h"
+
+USBD_Usr_cb_TypeDef USR_cb =
+{
+ USBD_USR_Init,
+ USBD_USR_DeviceReset,
+ USBD_USR_DeviceConfigured,
+ USBD_USR_DeviceSuspended,
+ USBD_USR_DeviceResumed,
+
+ USBD_USR_DeviceConnected,
+ USBD_USR_DeviceDisconnected,
+};
+
+
+/**
+* @brief USBD_USR_Init
+* Displays the message on LCD for host lib initialization
+* @param None
+* @retval None
+*/
+void USBD_USR_Init(void)
+{
+
+}
+
+/**
+* @brief USBD_USR_DeviceReset
+* Displays the message on LCD on device Reset Event
+* @param speed : device speed
+* @retval None
+*/
+void USBD_USR_DeviceReset(uint8_t speed )
+{
+ switch (speed)
+ {
+ case USB_OTG_SPEED_HIGH:
+ break;
+
+ case USB_OTG_SPEED_FULL:
+ break;
+ default:
+ break;
+
+ }
+}
+
+
+/**
+* @brief USBD_USR_DeviceConfigured
+* Displays the message on LCD on device configuration Event
+* @param None
+* @retval Status
+*/
+void USBD_USR_DeviceConfigured (void)
+{
+}
+
+
+/**
+* @brief USBD_USR_DeviceConnected
+* Displays the message on LCD on device connection Event
+* @param None
+* @retval Status
+*/
+void USBD_USR_DeviceConnected (void)
+{
+}
+
+
+/**
+* @brief USBD_USR_DeviceDisonnected
+* Displays the message on LCD on device disconnection Event
+* @param None
+* @retval Status
+*/
+void USBD_USR_DeviceDisconnected (void)
+{
+}
+
+/**
+* @brief USBD_USR_DeviceSuspended
+* Displays the message on LCD on device suspend Event
+* @param None
+* @retval None
+*/
+void USBD_USR_DeviceSuspended(void)
+{
+ /* Users can do their application actions here for the USB-Reset */
+}
+
+
+/**
+* @brief USBD_USR_DeviceResumed
+* Displays the message on LCD on device resume Event
+* @param None
+* @retval None
+*/
+void USBD_USR_DeviceResumed(void)
+{
+ /* Users can do their application actions here for the USB-Reset */
+}
+
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-01-27 02:00:18 +0000