diff options
Diffstat (limited to 'unittest/raw_data_curves/Makefile')
| -rw-r--r-- | unittest/raw_data_curves/Makefile | 132 |
1 files changed, 0 insertions, 132 deletions
diff --git a/unittest/raw_data_curves/Makefile b/unittest/raw_data_curves/Makefile deleted file mode 100644 index 9f13d1f..0000000 --- a/unittest/raw_data_curves/Makefile +++ /dev/null @@ -1,132 +0,0 @@ -# Makefile -# Dec 2022 -# -# Automates PER/BER curve generation for raw data mode: -# -# 1. Compare "ch" noise injection/SNR measurement against reference Octave Tx -# 2. Compare C Tx against Octave Tx (with and without compression) -# 3. Plot curves for SNR estimated from C Rx against actual SNR -# 4. Plot AWGN/PER C Tx curves for end user documentation - -SHELL := /bin/bash -CODEC2 := $(HOME)/codec2 - -all: test \ - octave_ch_noise_awgn.png octave_c_tx_awgn.png octave_c_tx_comp_awgn.png \ - octave_ch_noise_mpp.png octave_c_tx_mpp.png octave_c_tx_comp_mpp.png \ - snrest_snr_ctx.png snrest_snr_ctxc.png \ - c_tx_comp.png c_tx_comp_thruput.png - -clean: - rm -f *.txt *.png *.raw - -# run this first, traps common CML setup error -test: - source snr_curves.sh; test_ldpc - -# subset of files generated, but enough to set up Makefile dependencies -snr_oct = snr_oct_datac0_awgn.txt snr_oct_datac1_awgn.txt snr_oct_datac3_awgn.txt -snr_ch = snr_ch_datac0_awgn.txt snr_ch_datac1_awgn.txt snr_ch_datac3_awgn.txt -snr_ctx = snr_ctx_datac0_awgn.txt snr_ctx_datac1_awgn.txt snr_ctx_datac3_awgn.txt -snr_ctxc = snr_ctxc_datac0_awgn.txt snr_ctxc_datac3_awgn.txt - -snr_oct_mpp = snr_oct_datac0_mpp.txt snr_oct_datac1_mpp.txt snr_oct_datac3_mpp.txt -snr_ch_mpp = snr_ch_datac0_mpp.txt snr_ch_datac1_mpp.txt snr_ch_datac3_mpp.txt -snr_ctx_mpp = snr_ctx_datac0_mpp.txt snr_ctx_datac1_mpp.txt snr_ctx_datac3_mpp.txt -snr_ctxc_mpp = snr_ctxc_datac0_mpp.txt snr_ctxc_datac3_mpp.txt - -$(snr_oct): - source snr_curves.sh; generate_octave_tx_data datac0 awgn - source snr_curves.sh; generate_octave_tx_data datac1 awgn - source snr_curves.sh; generate_octave_tx_data datac3 awgn - -$(snr_oct_mpp): - source snr_curves.sh; generate_octave_tx_data datac0 mpp - source snr_curves.sh; generate_octave_tx_data datac1 mpp - source snr_curves.sh; generate_octave_tx_data datac3 mpp - -$(snr_ch): - source snr_curves.sh; generate_ch_data datac0 awgn - source snr_curves.sh; generate_ch_data datac1 awgn - source snr_curves.sh; generate_ch_data datac3 awgn - -$(snr_ch_mpp): - source snr_curves.sh; generate_ch_data datac0 mpp - source snr_curves.sh; generate_ch_data datac1 mpp - source snr_curves.sh; generate_ch_data datac3 mpp - -# C without compression - -$(snr_ctx): - source snr_curves.sh; generate_snrest_v_snr_data datac0 awgn - source snr_curves.sh; generate_snrest_v_snr_data datac1 awgn - source snr_curves.sh; generate_snrest_v_snr_data datac3 awgn - source snr_curves.sh; generate_snrest_v_snr_data datac4 awgn - source snr_curves.sh; generate_snrest_v_snr_data datac13 awgn - -$(snr_ctx_mpp): - source snr_curves.sh; generate_snrest_v_snr_data datac0 mpp - source snr_curves.sh; generate_snrest_v_snr_data datac1 mpp - source snr_curves.sh; generate_snrest_v_snr_data datac3 mpp - source snr_curves.sh; generate_snrest_v_snr_data datac4 mpp - source snr_curves.sh; generate_snrest_v_snr_data datac13 mpp - -# C with compression - -$(snr_ctxc): - source snr_curves.sh; generate_snrest_v_snr_data datac0 awgn 1 - source snr_curves.sh; generate_snrest_v_snr_data datac1 awgn 1 - source snr_curves.sh; generate_snrest_v_snr_data datac3 awgn 1 - source snr_curves.sh; generate_snrest_v_snr_data datac4 awgn 1 - source snr_curves.sh; generate_snrest_v_snr_data datac13 awgn 1 - -$(snr_ctxc_mpp): - source snr_curves.sh; generate_snrest_v_snr_data datac0 mpp 1 - source snr_curves.sh; generate_snrest_v_snr_data datac1 mpp 1 - source snr_curves.sh; generate_snrest_v_snr_data datac3 mpp 1 - source snr_curves.sh; generate_snrest_v_snr_data datac4 mpp 1 - source snr_curves.sh; generate_snrest_v_snr_data datac13 mpp 1 - -# Octave and C curves should be on top of each other, indicating Octave -# and ch noise injection/SNR measurement are equivalent -octave_ch_noise_awgn.png: $(snr_oct) $(snr_ch) - echo "snr_curves_plot; octave_ch_noise_print('awgn'); quit" | \ - octave-cli -p $(CODEC2)/octave -octave_ch_noise_mpp.png: $(snr_oct_mpp) $(snr_ch_mpp) - echo "snr_curves_plot; octave_ch_noise_print('mpp'); quit" | \ - octave-cli -p $(CODEC2)/octave - -# Octave Tx and C Tx curves should be on top of each other -octave_c_tx_awgn.png: $(snr_oct) $(snr_ctx) - echo "snr_curves_plot; octave_c_tx_print('awgn'); quit" | \ - octave-cli -p $(CODEC2)/octave -octave_c_tx_mpp.png: $(snr_oct_mpp) $(snr_ctx_mpp) - echo "snr_curves_plot; octave_c_tx_print('mpp'); quit" | \ - octave-cli -p $(CODEC2)/octave - -# Octave Tx and C Tx (compressed) curves should be close, but C may be 1dB -# poorer -octave_c_tx_comp_awgn.png: $(snr_oc) $(snr_ctxc) - echo "snr_curves_plot; octave_c_tx_comp_print('awgn'); quit" | \ - octave-cli -p $(CODEC2)/octave -octave_c_tx_comp_mpp.png: $(snr_oct_mpp) $(snr_ctxc_mpp) - echo "snr_curves_plot; octave_c_tx_comp_print('mpp'); quit" | \ - octave-cli -p $(CODEC2)/octave - -# combined AWGN and MPP from C Tx (compressed) - what end users would run -c_tx_comp.png: $(snr_ctxc) $(snr_ctxc_mpp) - echo "snr_curves_plot; c_tx_comp_print; quit" | \ - octave-cli -p $(CODEC2)/octave - -# Curves of SNR estimates from C Rx compared to actual SNR, useful for "gear shifting" -snrest_snr_ctx.png: $(snr_ctx) - echo "snr_curves_plot; snrest_snr_print('ctx', 'awgn'); quit" | \ - octave-cli -p $(CODEC2)/octave -snrest_snr_ctxc.png: $(snr_ctxc) - echo "snr_curves_plot; snrest_snr_print('ctxc', 'awgn'); quit" | \ - octave-cli -p $(CODEC2)/octave - -# Throughput of payload data in bits/s of modes against SNR -c_tx_comp_thruput.png: $(snr_ctxc) $(snr_ctxc_mpp) - echo "snr_curves_plot; c_tx_comp_thruput_print; quit" | \ - octave-cli -p $(CODEC2)/octave |